User's Manual
Table Of Contents
- Limited Warranty, Limitations Of Liability And Restrictions
- System Menu Option
- Date/Time: Configuring Date and Time
- Configuration: Configuring Orientation, Language, Units, Laser, and Sound
- Calibration: Auto Calibrations for Surface and Brightness
- Clear Storage: Deleting Saved Data
- Deleting All Projects or Deleting Specific Projects
- Scan Density: Selecting the Scan Density
- Backlight: Setting the Brightness of the Mini Backlight
- Save Prompt: Whenever Saving, Have the System Prompt You to Save or Save Automatically
- Collect Menu Option
- Project: Saving Files to a Specific Project
- Depth: Selecting the Depth Where You are Scanning
- Dielectric: Selecting the Approximate Dielectric of the Area You are Scanning
- Autotarget: Allowing the Mini to Automatically Pick Your Targets
- Display: While Collecting Data, Display Data Only or Data + O-Scope
- Color: Choosing the Colors You Want Displayed During Data Collection
- Collecting Data and Marking Your Targets
- Playback Menu Option
- Project: Selecting a Specific Project to Select a Specific File to Playback
- AutoDepth: Automatically Adjusting Depth Scale
- Autotarget: Allowing the Mini to Automatically Pick Your Targets
- Display: While Viewing Data, Display Data Only or Data + O-Scope
- Color: Choosing the Colors to Display During Data Collection
- Playing Back the Selected File
Quick Start Guide StructureScan Mini
Geophysical Survey Systems, Inc.
17
Playing Back the Selected File
1
Highlight Playback.
2
Press Enter to play back the selected file.
Note at the top of the screen the following information:
• Depth
• Distance
• Dielectric
• File name
While in Playback, you will have an option to toggle between four different modes by simply pressing the Enter button.
The mode you are in will be displayed at the bottom of the screen.
•
Scroll Mode
– Allows you to scroll your data left and right
•
Distance Cursor Mode
– Allows you to move a vertical line left and right on your data
•
Depth Cursor Mode
– Allows you to move a horizontal line up and down on your data.
•
Set Depth Mode
– Allows you to set a known depth to your targets.
Data with AutoTarget OFF
Data with AutoTarget ON