User Manual

Geophysical Survey Systems, Inc. HandyScan
User's Guide
MN70-416 3
HandyScan Operation
1. Install a charged battery.
2. Turn power On (switch is located on the back panel).
3. Wait until data screen appears (about 15 sec).
4. Check battery indicator (top right corner of the screen).
5. If a low battery is indicated, turn system off and replace.
Using Setup Table:
1. Press Set on the keypad to display setup table, then:
• Up/down arrows to select a parameter,
• Left/right arrows to change it.
Disp. Direction:
normal / invert
Disp. Mode :
B / AB
Amplitude :
abs / offset
X-axis :
distance / time
Depth :
ns / -3 to 3
Contrast :
(number)
Date/time :
05/10/2001
Data_No. :
1
Dist adj. :
+0 [0.00m]
Output :
printer / computer
Baud rate :
57600
Default :
NO