User's Manual
Table Of Contents
- QF7D50300800 Manual
- Keyboard Capability 2
- ToughBook Information 3
- Standard Icons 4
- Display Channel (Frequency) Icons 4
- Powering and Booting Up 5
- Powering Down 7
- Playback Only Mode 8
- New Project Mode and Last Project Mode 20
- Collecting Data 32
- Limited Warranty, Limitations Of Liability And Restrictions
- Regulatory Information
- Section 1: Getting Started
- Keyboard Capability
- ToughBook Information
- Standard Icons
- Display Channel (Frequency) Icons
- Powering and Booting Up
- Powering Down
- Section 2: Playback Only, New Project, and Last Project Modes
- Playback Only Mode
- New Project Mode and Last Project Mode
- Collecting Data
- Appendix A: Cart and Antenna Assembly Instructions
- Appendix B: Battery Charger Information
- Appendix C: Dielectrics of Common Materials (Soil Conditions)
- Appendix D: Examples of Some Common Objects
- Appendix E: Glossary of Terms
- PageBreak
- Y15198D1 GPR Coordination Notice& Equip Reg
- Canadian Requirements for RSS
- Equipment CE Conformance
Quick Start Guide UtilityScan DF
Copyright © 2012 Geophysical Survey Systems, Inc. 18
All Rights Reserved
Playback File(s) Options
Depending upon the type of display you selected in the previous screen,
the data will display in the same mode (High, Low, or Blend)
Displayed at the top of the screen:
• The name of the file.
• The location of the cross hair (X for distance, Z for depth). Place
the stylist pen on the screen to move the cross hair to the desired
position.
Menu Options at the Bottom of the Screen
• Cursor Left: Scroll the data towards the beginning of the file.
• Cursor Right: Scroll the data towards the end of the file.
• Mark: Mark the data for reference points.
a) Place the stylist pen on the screen.
b) Move the pen around and place the vertical line where you would like the mark to be placed.
c) Tap the Mark Icon.
In this example, the Noise Indicator is turned
on, as indicated by the green shaded area.