User's Manual

Quick Start Guide UtilityScan 350HS

8 Place the cover of the capsule, starting in the back as shown. Make certain there is service loop with the cables so

that there is no tension with the cables as the capsule moves up and down during data collection. Latch the cover

to the lock position.

9 Depending on site conditions and to increase the life of the capsule, you

should adjust the height of the capsule by using a strap. Place a ¼ inch

piece of plywood under the capsule. Loosen the straps so that the

capsule sits on the plywood, then re-tighten the straps.

10 Insert the ToughBook batteries (2), one on each side of the ToughBook.