User's Manual

Quick Start Guide UtilityScan 350HS

•

Gain Settings

• Gain Mode

• Auto allows the system to configure the Gain.

• Manual allows the user to configure the Gain.

• Number of Points (Only if Gain Mode is set to Manual) • Number of

points or “Individual Sections” to adjust the Gain.

• Ranges for 1 point to 8 points.

• GP1: 8 (Only if Gain Mode is set to Manual)

• Depending upon number of Gain Points, adjust each section accordingly.

• Values range from -42 to 126.

Note: Tap on the double arrows (up or down) to display the appropriate gain points.

Filters (See Appendix E for more information)

• Stacking: To reduce random or high frequency noise in your data.

• Background Removal: Remove horizontal banding in your data.

• Noise Indicator

• On: Display approximately the depth where data becomes too weak.