Hardware Guide
Table Of Contents
Installation Guide Tenera
This material is the property of GeoNavo Positioning Systems, Inc. It may contain certain confidential and proprietary information and is not to
be reproduced, distributed or otherwise disclosed to any third party without permission of GeoNav
o Positioning Systems, Inc. All rights,
including copyright and patent rights are reserved by GeoNavo Positioning Systems, Inc. © 2017 GeoNavo Positioning Systems,
Inc.
6
1.2 PROVISIONING PROCEDURE
If the application is not already loaded on your android device, please contact Tenera for
the latest version of the application.
1. Ensure the beacon is plugged into a local power source and Bluetooth is turned on
for your device.
2. Load the Provisioning Application and select “Start Provisioning”
3. From within the provisioning app you should see the beacon appear in the app. If
the beacon does not appear hit the “Scan Again” button within the app and verify
that the beacon is plugged in and has power.