User Manual

Total Station Manual
192
In Tools Menu, choose “1 Adjust”, and then press [F3] to enter “Adjust Tilt X”.
These are the calibaration of x-diretion of compensator’s vertical axis.
Steps Key Display
ƻ
1 Level instrument,
focus on the reticle of
collimator, record the
vertical angle V0. Use
fine tuning to set
vertical angle to
V0+3’,focus on the
reticle center accurately,
wait for stable
value,press [F4](OK).
[F4]
ƻ
2 Use fine tuning to set
the vertical angle to
V0-3’, focus on the
reticle center accurately,
wait for stable value,
press [F4] (OK).
[F4]
ƻ
3 Use fine tuning to set
the vertical angle as
V0,focus on the reticle
center accurately.
ƻ
4
Reverse the
telescope, use face right
to focus on the reticle of
collimator,record the
vertical angle V1.Use
fine tuning to set the
vertical angle as
[F4]