User Manual

Total Station Manual

180

7. Data Transfer

This function is doing data transmission between instrument and computer,or

between instrument and removable device. This function includes 2 parts, import and

export.

The data transmission between instrument and removable device must have U

Disk plugged in.

Note: The machine supports up to 8G U disk read and write, when running the

program, don’t insert or pull out the U disk. If you pull out the U disk when the

instrument checking it, the subsequent operations may cause error!

1. Data Import

User can use this function to transfer fixed points data or code data to instrument

from computer via RS232 cable. User can also transfer fixed points data to instrument

via UDisk.

Import: Fixed Points, Code

Method: RS232, UDisk

Format: CASS, GTS-7, CSV, GSI(For UDisk)

Source: Data file in UDisk (For UDisk)

Job: Target job that data been transfer to.

Steps Key Display

In main

menu,chooses “4

Transfer” to enter

“Data Transfer” menu.

Pressing [F1] or [1]

enters “Import Data”.

[4]

[F1]

[1]