User Manual

Total Station Manual

143

6 Press [CALC] to see the

result point coordinate.If need

to calculate other chain point,

press [ESC] to return.

[F3]

7Press[REC]tosavethe

point coordinate data. User can

edit the point’s number.

[F3]

8 Press [Stakeout] to do the

point’s stakeout.

[F4]

Note: If has saved road data, next time user can directly go to the road program

without inputting road data again.

13. Stakeout Reference Element

Stakeout Reference Element is used for making Reference Element stakeout and

check easier, such as building, road cross section, or simple excavation. User can

define a Reference Line/ARC, according to measuring result, to calculate out the

deviated difference& elevation difference between measuring point and reference

line/arc. Reference element function include:

 RefLine

 RefArc

13.1 RefLine

User need to define a reference line through a known base line. The reference

line can be shifted in longitudinal, horizontal, vertical direction, or rotate around the

first base point as needed. The line after shift is as reference line, all observed data

refer reference line. User can choose the first point, second point or mean point in