User Manual

Total Station Manual
111
Unknown
a Direction from P0 to P1
S Slope distance between P0 and P1
d1 Horizontal distance between P0 and P1
d2 Height difference between P0 and P1
Steps key Display
ƻ
1 In the [Traverse
&Inverse]screen,
press [F1] or [1] to
enter the Inverse
subapplication.
[F1]
or
[1]
ƻ
2
There are four
ways to get the
known point for
inverse calculation.
A: Input the name of
known point in“Pt.”
field in [Traverse]
screen and press
[F1](Meas.) entry the
[COGO Meas]
Input prism height in
the “T.H.” field on
[COGO-Meas], then
aim the prism and
press [F1](ALL) or
[F2](DIST) +
[F3](REC) to
measuring and
saving the point for
inverse calculation.
Input point
name
+[F1](Meas.
)
[F1](ALL)
Or
[F2](DIST)
+
[F3](REC)
A: Get the known point by COGO-Meas
COGO-Meas.
B: Press [F1](List) in [F1](List) B: Select the point by list in the