User Manual

Total Station Manual
125
point in relation to a line from known longitudinal and offset distance.
Figure 11.8 Set Point Diagram
Known
P1 Start Point
P2 End Point
d1
Ƹ
Line
d2
Ƹ
Offset
Unknown
P3 COGO point
Steps key Display
ƻ
1
In the [Offsets]
screen, press [F2] or
[2] to enter the Set
Point subapplication.
[F2]
or
[2]
ƻ
2 Set the start point
and end point.
Ć
There are four ways
to get the known
point for Set Point
calculation. Please
Set known
points