User Manual

Total Station Manual
109
the “T.H.” field in
[COGO-Meas], then
aim the prism and
press [F1] (ALL) or
[F2] (DIST) + [F3]
(REC) to measuring
and saving the point
for traverse
calculation.
COGO-Meas.
B: Press [F1](List) in
[Traverse] screen, use
the key [▲]\[▼]to
select a Known point
in the point list for
traverse calculation,
then press [F4](OK)
to be selected.
[F1](List)
+
[F4](OK)
B: Select the point by list in the memery.
C: Input the name of
known point and
press [F3](Find) to
find whether the point
is in memory, if exist,
then press [F4](OK)
to be selected for
calculating; if not
exist, then need to
input or measure the
point.
Input name
+
[F3](Find)
+
[F4](OK)
C: Input the name of the point and find
whether it is in memory.
D: Press [F2](Coord.)
to input a known
point that not exist in
memory.
[F2](Coord.
)
+
Input
Coord.
+
[F4](OK)
D: Input the point through keyboard.