User Manual

Total Station Manual
104
Steps Key Display
ƻ
1
Select “Program” from
the [Main Menu] window,
then press [PAGE] switch to
second program list and
press [F2] or number key [6]
to enter the Area application.
[PAGE]
+
[F2]
or
[6]
ƻ
2 After finishing the
pre-settings (know more
details at the beginning of
chapter 5), press [F4] to
enter the [Base Pt.] window
to start Remote Height app.
[F4]
ƻ
3
Move the prism just
standing below the remote
point, then aim at the prism
after input the prism high
and press [F1] (ALL) or [F2]
+[F3](DIST+REC)to
finish the base point
measuring. Then enter the
[REM PT] window.
[F1]
or
[F2]
+
[F3]
ƻ
4
Turn the instrument
telescope aimed at remote
point and press [F4] to finish
current remote point
measuring. Press [F1] to
re-set the base point.
[F4]