GeoMax Zenius800 Solutions Manual Version 1.
Introduction Purchase Congratulations on the purchase of a GeoMax Zenius800. ☞ The content of this document is subject to change without prior notice. Ensure that the product is used in accordance with the latest version of this document. Updated versions are available for download at the following Internet address: https://partners.geomax-positioning.com/downloads.htm Product identification The model and serial number of your product are indicated on the type plate.
Table of Contents 1 Description of the System 4 1.1 1.2 4 4 4 4 4 5 1.3 1.4 2 3 Overview System Concept 1.2.1 Power Concept 1.2.2 Data Storage Concept System Components Instrument Components User Interface 6 2.1 2.2 2.3 6 6 8 Keyboard Operating Principles System Main Interface Operation 3.1 3.2 3.3 3.4 3.5 3.6 12 Batteries 3.1.1 Changing the Battery 3.1.
1 Description of the System 1.1 Overview Zenius800 General Description The Zenius800 is a compact, high performance, low weight device with an integrated high accuracy GNSS, designed for outdoor & fieldwork usage. The Zenius800 can withstand severe environmental conditions including vibration, shock, moisture and temperature variations. The Zenius800 is suitable for use in harsh environments such as construction sites, warehouses, military, manufacturing and field service. 1.2 System Concept 1.2.
1.4 Instrument Components Front side of the Zenius800 a b c d 19406_001 a b c d Front camera Ambient light sensor Microphone Keys a b c d k Rear camera Camera flash External antenna port Lock A for battery compartment Lock B for battery compartment Connector for USB-C Connector for 3.
2 User Interface 2.1 Keyboard Keypad a b c d e f g h a b c d e f g h 19420_001 Description of the keys 2.2 Decrease volume key Increase volume key F1 key Menu key Home screen key Back key F2 key Power key Key Description Decrease volume key Press to decrease volume and ring tones. Increase volume key Press to increase volume and ring tones. F1 key User-defined function key F1. Menu key Scrolls through open applications/menus. Home screen key Press to return to Home screen.
Turning off the Zenius800 step-by-step 1. Press the Power key for at least 1 second to open the Power off menu. Within the menu, the following options are available: • Power off: The operating system shuts down and the Zenius800 is turned off. • Restart: The operating systems shuts down and will restart the system again. • Airplane mode: Prevents the device from sending or receiving calls and text messages. Airplane mode is also known as offline mode, standalone mode and flight mode. 2.
2.3 System Main Interface Home screen The home screen with multiple panels is the starting place for accessing all functionalities of the Zenius800. Access 1 2 19427_001 1. Turn on the Zenius800. Refer to "Turning on the Zenius800step-by-step". The boot screen appears. 2. Slide the screen upward to unlock and access the home screen.
Action Description Hide the notification panel Drag the bottom border of the panel upwards to hide the panel again. Customise the shortcut panel Action Description Remove a shortcut icon Tap and hold the shortcut icon and drag it to the delete icon Add a shortcut icon Tap and hold the icon on the home screen and drag it to the shortcut panel.
Icon Description Battery has low charge: 20% Battery has less than 20% charge. Connected to AC. Battery is charging. Speaker status icons Icon Description Volume on. Volume off. Volume mute. Network and modem status icons Icon Description Bluetooth connected. Bluetooth disabled. Bluetooth searching. Wi-Fi radio on. Wi-Fi radio off.
Icon Description Maximum signal strength of cellular modem. Cellular modem OFF. No cellular service available. No SIM card. Application screen ☞ The appearance of the application screen depends on the installed applications and is subject to change. Access 1. 2. Tap the arrow screen. on the Zenius800 home screen to switch to the application Tap and hold a program icon to open an application-related menu.
3 Operation 3.1 Batteries Battery Power System The Zenius800 device is designed to work with one removable battery placed inside the battery compartment. The fully charged battery provides several hours of battery life. 3.1.1 Changing the Battery Remove the battery step-by-step 2 5 3 4 6 19424_001 ☞ Insert the battery step-by-step 12 Operation Ensure that the Zenius800 is off. Refer to "Turning off the Zenius800 step-by-step". 1.
☞ To open the battery compartment, follow the instructions of "Remove the battery step-by-step". 1. To insert the battery to the compartment, attach the upper side of the battery to the compartment at an angle. Align the contacts of the battery with the connectors of the battery compartment. 2. Lower the bottom side of the battery and put it in gently. 3. Push the lock of the battery to the lock position to secure the battery. 4. Attach the cover of the battery compartment at an angle.
Insert and remove a SIM card or a Micro SD card step-by-step The slots for the SIM card and the Micro SD card are inside the battery compartment of the Zenius800. 1 5s =OFF 2 4 3a Micro SD 3b SIM/UIM 19426_001 1. Turn off the Zenius800 and place it on a stable surface, with the back side facing up. 2. Open the battery compartment and remove the battery. Refer to " Remove the battery step-by-step". 3. Take note on the direction of the notched corner of the card.
3. Turn on the bluetooth switch to activate the bluetooth option. A list of Available devices appears. After bluetooth is turned on, a bluetooth icon is displayed in the status bar. ☞ 3.5 Establish a Wi-Fi connection step-by-step 4. Select a device you want to connect to. The Bluetooth pairing request dialog opens. 5. In the Bluetooth pairing request dialog, enter the bluetooth password and tap Pairing. 6.
896256-1.0.0en Original text © 2019 GeoMax AG, Widnau, Switzerland GeoMax AG www.geomax-positioning.
