Item Brochure

Unbeatable eld solution
AUGMENTED REALITY. TURN ON
REALITY!
Point the camera to the site and you can see
immediately where the points and elements are
for stakeout. X-PAD Ultimate will guide you in
the vicinity of the point and then determine the
exact location, but you can also use augmented
reality to see what is not possible to see.
BIM
With BIM, IFC les can be loaded, displayed
in the main CAD view and also in survey,
stakeout and COGO commands. Elements can be
selected, hidden or isolated. From BIM models,
it is possible to extract points, lines, surfaces
and cross-sections for stakeout and checking
operations.
VOICE COMMANDS
X-PAD Ultimate can be controlled by voice
commands; you don’t need to touch the
screen to measure points, change the survey
code, change target type, and for many other
operations.
GIS: RECORD ALL INFORMATION
YOU WANT
The integrated GIS feature allows to create your
GIS features and to dene the corresponding
attributes that can be lled when the point is
stored.
CLOUD AND SHARING POINT.
FIELD AND OFFICE, ALWAYS
CONNECTED
With X-PAD Ultimate you can open and import
any le, even if it is in the cloud. You can save
your data on the most popular cloud platforms,
like Google Drive, Microsoft OneDrive and
Dropbox, and access from the eld or oce.
If you need to, though, you can also share
information and coordinates of the measured
points quickly via a message or email with photo
attached to those in the oce waiting for the
coordinates of a point.
Uncomparable adaptability
X-POLE: ONE POLE, TWO SYSTEMS
The X-Pole solution allows you to work
simultaneously with TPS and GNSS using the
best features of each system and with maximum
exibility. A simple click is all you need to
change the measurement mode and switch from
GNSS to TPS mode and vice versa. The GNSS
system positioned above the prism, gives you
a direct rotation on the prism speeding up the
locking operations after loss.
ROADING. THE WHOLE PROJECT
IN THE CONTROLLER
The Roading feature allows you to load, manage
and perform alignment stakeouts of works such
as roads, highways and canals. The management
is fully visual, so you always know what you’re
doing. At any moment, you can see plans,
vertical proles and cross sections.
You can stake all elements of the work (axes,
edges, sideslopes, walls, ditches) at any station
and with any oset, using the cross sections,
the edge polylines or by dening one or more
sections template.
ROBOTIC TOTAL STATION.
WORK IN AUTONOMY
Robotic feature allows you to have full control
of the robotic total station remotely. From a
practical panel, you can access all the control
functions of the station. In case of loss of the
prism, it is possible to choose among dierent
search strategies. Locking status is always
available on the screen, and with one click, it
is possible to start the searching process even
using the GPS position of the controller.
TERRAIN SURFACES AND
VOLUMES
With the Volumes features, X-PAD Ultimate can
calculate terrain models from the points with
the options to dene breaklines and boundaries.
From the models, you can go to the volume
calculation to determine at a glance the cubic
metres of an excavation or of a pit. You can also
import models from DXF or LandXML les. Use
the stakeout command to determine, in eld,
the design elevations.
AUTOMEASURING
Automeasuring is the simple, exible, safe and
economical solution for all you need to use the
total station for automatic measurement. Just
connect your total station with your Android
device and get the real-time data.