Product Manual

☞
When PPM=0 is selected, the GeoMax standard atmosphere of 1013.25 mbar,
12°C, and 60% relative humidity will be applied.
This screen enables entry of the scale of projection. Coordinates are corrected with the PPM
parameter. Refer to "9.6 Scale Correction" for the application of the values entered in this
screen.
This screen enables the entry of individual scaling factors. Coordinates and distance measure-
ments are corrected with the PPM parameter. Refer to "9.6 Scale Correction" for the application
of the values entered in this screen.
This screen tests the EDM signal strength (reflection strength) in steps of 1%. Enables optimal
aiming at distant, barely visible, targets. A percentage bar and a beeping sound, indicate the
reflection strength. The faster the beep the stronger the reflection.
5.5 Communication Settings
For data transfer the communication parameters of the instrument must be set.
1. Select Settings from the MAIN MENU.
2. Select Comm. from the Settings menu.
BTCode
The default Bluetooth code is ‘0000‘.
Field Description
Port Instrument port.
RS232 Communication is by the serial interface.
Only for service purpose.
USB Communication is by the USB host port.
Bluetooth Communication is by Bluetooth.
Bluetooth On Bluetooth sensor is activated.
Off Bluetooth sensor is deactivated.
The following fields are active only when Port: RS232 is set.
Field Description
Baudrate Speed of data transfer from receiver to device in bits per second.
1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200
PROJECTION SCALE
Free-PPM Entry
EDM SIGNAL REFLECTION
Description
Access
COMMUNICATION SET-
TINGS
Settings 35