Product Manual

Icon Description
FOIL EDM mode for measuring to sticker targets. Tap the icon to
open the EDM SETTINGS screen.
Indicates that a user defined custom target has been set.
Keypad is set to numeric mode.
Keypad is set to alphanumeric mode.
Indicates that telescope position is face I. Tap the icon to open
the Level Up screen.
Indicates that telescope position is face II. Tap the icon to open
the Level Up screen.
Bluetooth is connected. If the icon is grey, the Bluetooth commu-
nication port is selected, but the status is inactive. If the icon is
blue, the status is active. Tap the icon to open the COMMUNI-
CATION SETTINGS screen.
USB communication port is selected. Tap the icon to open the
COMMUNICATION SETTINGS screen.
RS232 communication port is selected. Tap the icon to open the
COMMUNICATION SETTINGS screen.
A double arrow indicates that a field has a selectable list.
3.4 Softkeys
Softkeys are selected using the relevant F1 to F4 function key. This chapter describes the func-
tionality of the common softkeys used by the system. The more specialised softkeys are descri-
bed where they appear in the program chapters.
Key Description
ALPH To change the keypad operation to alphanumerical.
NUM. To change the keypad operation to numerical.
BACK To return to the last active screen.
EDM To view and change EDM settings. Refer to "5.4 EDM Set-
tings".
MEAS To start distance and angle measurements without saving the
measured values.
OK If entry screen: Confirms measured or entered values and
continues the process.
If message screen: Confirms message and continues with
selected action or returns to the previous screen to reselect
an option.
DEFAULT To reset all editable fields to their default values.
Description
Common softkey functions
User Interface 23