Product Manual

1.6.2 Labelling
Pav = 4.8mW λ = 658nm tp = 400ps
IEC 60825-1:2014
Made in China Developed by Hexagon Group Sweden
Complies with FDA performance standards for laser products
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
123456
S.No. :
123456
Art.No. :
Equip.No.: 1234567
Power:12V/7.4V , 1.5A max.
GeoMax AG
CH-9443 Widnau
Manufactured: 20XX
Model: Zoom40
25
0015118_001
a
a Laser beam
This device complies with 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) This device must
accept any interference received,
including interference that may cause
undesired operation.
+80°C
Type: ZBA301 Art.No.: 794086
Li-Ion Battery: 7.4V /4.4Ah 10A 33Wh
GeoMax AG, CH-9443 Widnau
Manufactured: 20XX S.NO.: 123456
Made in China
MH49009 4WL5
015393_001
1.6.3 Distancer, Measurements without Reflectors (NP mode)
The EDM module built into the product produces a visible laser beam which emerges from the
telescope objective.
The laser product described in this section is classified as laser class 3R in accordance with:
•
IEC 60825-1 (2014-05): “Safety of laser products”
Labelling Zoom40
Labelling internal battery
ZBA301
General
Safety Directions 11