Product Manual

39
WLAN CLIENT
8.1 Enabling the WLAN Radio
The WLAN Driver must be enabled for the radio to
transmit a signal. You cannot connect to a network
unless the radio is enabled.
There are two ways in order to enable WLAN Driver: Wi-
Fi Turned on/off from Wireless Manager and from PWC
Control.
1. Start -> Setting -> Connections -> Wireless Manager -
> Select Wi-Fi.
2. Start -> PWC -> Power On button tap in Status page.
8.2 Establishing a Connection
1. Tap Start -> PWC.
2. Tap the Config Tab on PWC.
3. Tap New button on top of Config Tab.
4. Type in SSID on Network Window.
5. Select a specific Security method from the drop-down
list according to the Access Point(AP).
6. Select Encryption method according to Security
setting.
7. Tap OK after typing in WEP keys or passwords.
8. You may find SSID appears on Config Tab list.
9. Select SSID and tap Connect .
10. The Status tab appears displaying the connection
status.