Product Manual

Zenius5
|
23
Operation
2) Use a grounding wrist strap all the time.
3) Place all the electronic components in a static-dissipative surface or static-shielded bag when they are
not in the chassis.
Apply general practice for working with static-sensitive devices when you open the device, insert the SIM
or SD card and closing the device:
Discharge any static charge before opening the device and working with the SIM or SD card.
The device must not be subject to high electrostatic potentials when it is open.
Minimise contact with internal components of the device.
Avoid any discharges of static electricity near the device when inserting the SIM or SD card.
Insert and remove a
SIM Card or a SD
Card step-by-step
Step
Description
The slots for the SIM card and the SD card are inside the battery compartment of the Zenius5.
1.
Turn off the Zenius5 and place it on a stable surface, with the back side facing up.
2.
Lift the latch handle of the cover and turn it counterclockwise to the vertical unlock position.
Remove the cover of the battery compartment.
3.
Remove the battery.
4.
a) Slide the SD card firmly into the upper slot.
b) Slide the SIM card with the chip facing down firmly into the bottom slot.
Do not force the card into the slot. The card should be held with the contacts
facing
the slot.
5.
Insert the battery back into the battery compartment.
6.
Reattach the compartment cover by inserting it bottom first. Fit the latch handle into place.
Secure the latch by turning it clockwise to the horizontal lock position.