Product Manual
Zenius5
|
17
User Interface
Resetting the Zenius5
step-by-step
If the Zenius5 stops responding to the stylus or does not respond when you press any key, it is necessary
to start a hard reset. To start a hard reset, do the following:
Step
Description
1.
Press and hold the Send key and the End key.
The Zenius5 resets.
2.
Press and hold the Power key until the LED power indicator turns from red colour to green
colour to turn on the Zenius5 again.
The LED communication indicator stays green during sleep mode. Any incoming call ends the
sleep mode.
Step
Description
1.
Press the Power key for at least 3 seconds to open the Power Off menu.
Within the menu, the following options are available:
• OK: The operating system shuts down and the device is turned off.
• Cancel: Close the Power Off menu and return to the main screen.
2.
To turn off the device, select the option OK.
After turning off the Zenius5, wait for at least 5 seconds before turning on the device again.
Sleep mode activation
step-by-step
To activate the sleep mode of Zenius5 do the following:
Step
Description
The Zenius5 must be switched on.
1.
Press and hold the Power key for 1 second.
The Zenius5 enters the sleep mode. The LED power indicator turns to green.
2.
Press the Power key again to resume operation.