Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
70EZiSYSTEM, Safety Directions
EN
Danger When using a Property Connection Set a hazardous signal may be present on the service
or mains outlet causing personal harm.
Precautions:
Do not use on electrical services which have impaired, or no insulation. If in doubt do not
use. Replace damaged Property Connection Set cable assembly before use.
Warning Inadequate securing of the surveying site can lead to dangerous situations, for example in
traffic, on building sites, and at industrial installations.
Precautions:
Always ensure that the survey site is adequately secured. Adhere to the regulations
governing safety and accident prevention and road traffic.
Warning The transmitter is capable of outputting potentially lethal voltages.
Precautions:
Care should be taken when handling exposed or non-insulated connections including;
the connection cables sets, the earth pin and the connection to the service.
Notify others who may be working on or around the service.
Warning The transmitter is capable of outputting potentially lethal voltages.
Precautions:
Care should be taken when using the maximum power output level.