Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
EZiSYSTEM, How to Use the Sonde 61
7.3 How to Locate a Service Using the Sonde
Locating the Sonde
1. Walk in line with the suspected direction
of travel observing the display. The
signal strength indicator will rise and fall
as you pass over the ghost signal at the
back of the Sonde, the peak signal
directly over the Sonde and the ghost
signal at the front. The numeric signal
strength indicator will display its highest
value when detecting the peak signal.
2. Retrace your steps and position the
locator directly over the peak signal.
Move the locator left and right until the
highest numeric reading is obtained.
This reading will indicate the Sonde’s
precise location.