Product Manual
Table Of Contents
- Introduction
- Table of Contents
- 1 General Information
- 2 How to Use the Locator
- 3 How to Use the Transmitter
- 4 How to Use the Conductive Rod
- 5 How to Use the Signal Clamp
- 6 How to Use the Property Connection Set
- 7 How to Use the Sonde
- 8 Care and Transport
- 9 Safety Directions
- 10 Technical Data
- 11 International Limited Warranty
- Appendix A Functional Checks
- Appendix B World Frequency Zones
- Index
104EZiSYSTEM, Functional Checks
• If the unit fails check the Transmitter's cable set is fully engaged and the clips are
connected.
• Repeated failure will indicate a faulty unit, which must be returned for service.
If any of these tests give no response or a significantly different response from normal, the
Transmitter should be returned for service.
Warning The transmitter is capable of outputting potentially lethal voltages.
Precautions:
Care should be taken when handling exposed or non-insulated connections including;
the connection cables sets, the Earth Pin and the connection to the service.
Notify others who may be working on or around the service.