Product Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 4.1 Main Menu
- 4.2 System Information
- 4.3 Setting Up the TPS Instrument
- 4.4 Setting up for Remote Control (with the RadioHandle)
- 4.5 Connecting to a Personal Computer
- 4.6 Power Functions
- 4.7 Batteries
- 4.8 Working with the Memory Device
- 4.9 Working with Bluetooth
- 4.10 LED Indicators
- 4.11 Guidelines for Correct Results
- 5 Settings
- 6 Apps
- 7 Care and Transport
- 8 Technical Data
- 8.1 Angle Measurement
- 8.2 Distance Measurement with Reflectors
- 8.3 Distance Measurement without Reflectors
- 8.4 Distance Measurement - Long Range (LO mode)
- 8.5 Automatic Prism Aiming AiM
- 8.6 Prism Search (Scout) - only available at Zoom90
- 8.7 Conformity to National Regulations
- 8.8 General Technical Data of the Product
- 8.9 Scale Correction
- 8.10 Reduction Formulas
- 9 Software Licence Agreement
- 10 Glossary
- Appendix A Menu Tree
- Appendix B Directory Structure
- Appendix C Pin Assignments
3
2
4
011050_001
1. Start the computer.
2. Plug the USB cable into TPS instrument.
3. Turn on the TPS instrument.
4. Plug the USB cable into the USB port of the computer. The Found New Hardware
Wizard starts up automatically.
5. Check Yes, this time only. Next>.
6. Check Install the software automatically (Recommended). Next>. The soft-
ware for Remote NDIS based GeoMax Device will be installed on your computer
7. Finish.
8. The Found New Hardware Wizard starts up automatically a second time.
9. Check Yes, this time only. Next>.
10. Check Install the software automatically (Recommended). Next>. The soft-
ware for GeoMax USB Device will be installed on your computer.
11. Finish.
For computerss with Windows XP operating system:
12. Run the ActiveSync installation program if not already installed.
13. Allow USB connections inside the Connection Settings window of ActiveSync.
For computers with Windows Vista or Windows 7/Windows 8/Windows 10 operating
system:
14. Windows Mobile Device Center starts up automatically. If does not start automati-
cally, start Windows Mobile Device Center.
3
2
4
011050_001
1. Start the computer.
2. Plug the USB cable into Zoom70/90 instrument.
3. Turn on the Zoom70/90 instrument.
4. Plug the USB cable into the USB port of the computer.
For computers with Windows XP operating system:
Connect USB cable to com-
puter for the first time
step-by-step
Connect to computer by
USB cable
step-by-step
Operation 33