Zoom3D_usermanual

Generic measuring utilities - 59
Generic measuring utilities
The set of utilities below are generic utilities that can be used in many different situations
both in survey and stakeout of insides both outside.
Check flat surfaces
The command allows to check if a reference surface is uniform or presents higher or lower
areas. It’s possible to select among three different types of surface: Horizontal, Vertical or
Generic by 3 points.
Horizontal plane
1. Measure a point on horizontal reference plane
2. Measure points to check on reference plane ; for every point measured it’s visualized the
distance between the measured pointed and reference plane.
Vertical plane
1. Measure the first point defining the vertical plane
2. Measure the second point defining vertical plane
3. Measure points to check on the reference plane ; for every point measured it’s visualized the
distance between the measured point and the reference plane.
Generic plane by 3 points
1. Measure the first point defining the reference plane
2. Measure the second point defining the reference plane
3. Measure the third point defining the reference plane
4. Measure points to check on the reference plane ; for every point measured it’s visualized the
distance between the measured point and the reference plane.
It’s possible to activate the continuous measuring that allows to change the measuring direction while
Zoom3D measures.