Zoom3D_usermanual

Data exporting and sharing - 31
Exportation of the measured points coordinates on (ASCII) text file
It’s possible to set the rules to export on text file:
1. During the procedures of selection of the exportation file it’s possible to specify the type of file; in
the list are visualized the importation/exportation schemes present in the system; select the correct
scheme for the file if available.
2. After defining the name of the file to export and the exportation folder press Next. If an exportation
scheme has been selected you will proceed directly to exportation of the without having to define
other parameters.
3. Select the type of format: Fixed or Delimitated; Select Fixed if data are exported with fixed width
(by columns); Select Delimitated if data are separated by a character; in case of Delimitated format
specify the character to be used to separate the content of the fields.
4. It’s possible to add a heading line with the name of the type of data exported.
5. Press Next
6. In this step it’s possible to set which fields must be exported and their order inside the file. If the
Fixed format has been set, it’s possible also to define the number of characters of every block
(column). The table visualizes in real time how data to export will be selected.
7. Press Next
8. Settings made can be saved in an exportation scheme to which you can assign a name. The next
importations/exportations can be performed using the scheme still set without having to set every
time the correct parameters.
9. Press Next to start exportation.