Product Manual

Zoom3D | 12Description of the System
en
2.3.2 RM100 Remote Control
Remote Control Compo-
nents
Navigation Buttons The RM100 Remote Control has five buttons that allow turning the Zoom3D and executing a distance
measurement or point projection, depending on the application program running.
The RM100 Remote Control does not support the Tool Kit applications.
Targeting Procedure
1) Rough targeting: hold / / / to turn the Zoom3D as long as key is pressed.
2) Fine targeting: short tap on / / / to turn the Zoom3D by small single steps.
3) Measure: Press .
2.4 Power Supply
First-time Use /
Charging Batteries
The battery must be charged prior to using it for the first time because it is delivered with an energy
content as low as possible.
The permissible temperature range for charging is between 0°C to +40°C/ +32°F to +104°F. For
optimal charging, we recommend charging the batteries at a low ambient temperature of +10°C to
+20°C/+50°F to +68°F if possible.
It is normal for the battery to become warm during charging. Using the chargers recommended by
GeoMax, it is not possible to charge the battery if the temperature is too high.
For new batteries or batteries that have been stored for a long time (> three months), it is effectual
to make only one charge/discharge cycle.
For Li-Ion batteries, a single discharging and charging cycle is sufficient. We recommend carrying out
the process when the battery capacity indicated on the charger or on a GeoMax product deviates signif-
icantly from the actual battery capacity available.
Operation / Discharging Batteries can operate from -10°C to +50°C/14°F to +122°F.
Low operating temperatures reduce the capacity that can be drawn; high operating temperatures
reduce the service life of the battery.
Zoom3D Power Supply
Only GeoMax authorised service workshops are entitled to replace the battery socket.
Internal: by battery socket, with non-removable Li-Ion batteries, 14.4 V, 63 Wh.
External: Power supply for Zoom3D connected by cable with country-specific plugs for worldwide use.
Input: 100 - 240 V AC, 50/60 Hz.
Output: 24 V DC, 2.5 A.
Length: 1.80 m.
a) Key ring
b) Battery compartment
c) DIST button
d) Navigation buttons: Up/Down/Right/Left
e) Control LED
RM100
acbde
011280_001
a) Battery socket
b) Power supply connector
a
b
010761_001