Product Manual

Zenith35 Pro | 18Operation
4.2.5 Connecting to a Personal Computer
Description The instrument is connected to a Personal Computer via serial/USB cable.
Install software
Connect instrument to
PC
4.2.6 Zenith35 Pro WebManager
Description The Zenith35 Pro WebManager software can be used to set up, configure and operate the instrument,
download data from the instrument and microSD card, enter licence keys and upload firmware.
Start Zenith35 Pro
WebManager
Step Description
1. Start the PC.
2. Download the cable driver from the GeoMax website.
3. Install the cable driver on a PC using a Windows operating system.
Step Description
1. Start the PC.
2. Plug the included cable into the port of the instrument.
3. Turn on the instrument.
4. Plug the cable into the USB port of the PC.
If Windows Hardware Wizard starts up, select CLOSE.
010032_001
3
4
5
Step Description
1. Turn on the Zenith35 Pro instrument.
2. Make sure your Wi-Fi on your PC/mobile device is turned on. Search for available connections.
3. When the instrument is found, connect it to your PC/mobile device.
4. As soon as the connection is established, start the web browser. Enter into the address bar
the IP http://192.168.10.1. A login-window pops up.
5. Enter user name and password. The default values are:
• User name: admin
• Password: password
6. After a successful login the info start screen of the Zenith35 Pro WebManager will appear and
the instrument can be accessed.