Product Manual

Zenith35 Pro | 16Operation
4.2.2 Setting up as a Post-Processing Base
Use The following equipment setup is used for static operations over markers.
Equipment setup -
Zenith35 Pro
Equipment setup step-
by-step
4.2.3 Setting Up as a Real-Time Rover
Use The following equipment setup is used for real-time rover.
Equipment setup -
Zenith35 Pro
a) Zenith35 Pro instrument
b) ZBA601 battery
c) ZCA100 carrier
d) Tribrach
e) Tripod
f) Handheld
010030_001
a
b
c
d
e
f
Step Description
1. Set up the tripod.
2. Mount the tribrach on the tripod.
3. Ensure that the tribrach is over the marker.
4. Mount and level the carrier on the tribrach.
5. Insert the battery into the instrument.
6. Press the ON/OFF button on the instrument for 2 s to switch on the instrument.
7. Screw the instrument onto the carrier.
8. Check that the tribrach and carrier are still level.
9. Connect the handheld to the instrument through Bluetooth
or through Wi-Fi to the Zenith35 Pro WebManager.
10. Measure the instrument height using the measuring tape. Refer to "2.6 The Mechanical Refer-
ence Plane, MRP" for information on the instrument height.
a) Zenith35 Pro instrument
b) ZBA601 battery
c) UHF antenna
d) ZPC200 pole
e) ZHR200 holder
f) Handheld
004579_001
a
b
c
d
e
f