Product Manual

Zenith35 Pro | 14User Interface
3.2 LED Indicators
LED indicators Description
The Zenith35 Pro has Light Emitting Diode indicators. They indicate the basic instrument status.
Diagram
Description of the LEDs
a) RTK Base LED
b) RTK Rover LED
c) Power LED
d) Wi-Fi LED
e) Bluetooth LED
f) Position LED
g) Storage LED
010017_001
a
b
c c
e
g
f
d
IF the is THEN
Wi-Fi LED green Wi-Fi is in data mode and ready for connecting.
blue Wi-Fi has connected.
Bluetooth LED green Bluetooth is in data mode and ready for connecting.
blue Bluetooth has connected.
RTK Base LED green Zenith35 Pro is in RTK base mode. No RTK data is being
passed to the interface of the communication device.
flashing green Zenith35 Pro is in RTK base mode. Data is being passed to
the interface of the communication device.
RTK Rover LED green Zenith35 Pro is in rover mode. No RTK data is being received
at the interface of the communication device.
flashing green Zenith35 Pro is in rover mode. RTK data is being received at
the interface of the communication device.
Position LED off no satellites are tracked.
flashing yellow less than four satellites are tracked, a position is not yet
available.
yellow a navigated position is available.
flashing green a code-only position is available.
green a fixed RTK position is available.
Power LED off battery is not connected, flat or Zenith35 Pro is switched off.
green power is 20% - 100%.
red power is 5% - 20%. The remaining time for which enough
power is available depends on the type of survey, the
temperature and the age of the battery.
fast flashing red power is low (<5%).
Storage LED green microSD card is inserted but no raw data is being logged.
flashing green raw data is being logged.
flashing red raw data is being logged but only 5% memory left.
red microSD card is full, no raw data is being logged or no
microSD card is inserted but Zenith35 Pro is configured to log
raw data.