Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom50 Series Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

Field Description

HA Corr Horizontal correction

Std.Dev Standard deviation indicating the potential variance between

the true orientation and that calculated.

Next step

•

Either, press Resid to display the residuals.

•

Or, press OK to set the orientation and return to the Pre-Settings screen.

d Offs(+)

d HA(+)

d HD(-)

1 Actual

2 Design

P2 Target point

d Offs Height correction

d HD Correction in horizontal

distance

d HA Correction in horizontal

direction

Field Description

BS ID Point IDs of the target points used in calculating the orienta-

tion.

d.H.A The difference in horizontal direction to the target point.

d.H.D The difference in horizontal distance to the target point.

dZ The difference in height to the target point.

If no orientation was set and an application was started, or if in Survey and a measurement was

recorded, then the current horizontal direction is set as the orientation.

Select GO! to begin the application.

Stn. Orientation Residuals

☞

Next step

62 Applications - Getting Started