Product Manual

SETOUT
To start the application SETOUT.
Check
To start the application Check.
Set Slp
To start the application Slope Setout.
Ch Slp
To start the application Check Slope.
Field Description
Offs. Left Horizontal offset to the left of the horizontal alignment.
Offs. Right Horizontal offset to the right of the horizontal alignment.
Ht. Diff. Vertical offset, either up or down, from the horizontal alignment.
Def. Chain Defined chainage for stake out.
Increment Value by which the defined chainage can be incremented or decremented
in applications Stake and Stake Slope.
Z Manual Height Height reference for height calculations. If enabled this
height is used for all applications.
Design Height The height reference for height calculations is the
selected vertical alignment file.
Manual Ht. Height to be used for Manual Height.
Next step
Select a softkey option, SETOUT, Check, Set Slp or Ch Slp, to proceed to an applica-
tion.
11.13.4 Setout
The application Setout is used to stake out points relative to an existing alignment. The height
difference is relative to a vertical alignment or manually entered height.
TSOX_054
P0
a
d
e+
e-
f+
f-
g+
g-
c
P1
P2
P3
b
P0 Instrument station
P1 Target point
P2 Measured point
P3 Measured point
a Horizontal alignment
b Defined chainage
c Offset
d Height difference
e+ D Offset, positive
e- D Offset, negative
f+ D Chainage, positive
f- D Chainage, negative
g+ D Height, positive
g- D Height, negative
Press SETOUT from the Define Setout/Check/Slope values screen.
Define Setout/Check/
Slope
Description
Access
Applications 99