Product Manual

Field Description
None All of the misclosure will be added to the last arc-
section.
Equal The misclosure will be equally distributed between
all sections.
Start Arc All of the misclosure will be added to the first arc-
section.
Start/End The misclosure will be added half to the first arc-
section and half to the last arc-section.
Arc
Length
For set out arc: The length of the arc-segment to set out.
Chord
Length
For set out chord: The length of the chord to set out.
Angle For set out angle: The angle around the center point of the arc, of the points to be
set out.
Line For set out arc, chord and angle: Longitudinal offset from the reference arc. This
is calculated by the arc length, chord length or angle and the selected misclosure
distribution.
For set out point: Longitudinal offset from the reference arc.
Offset Perpendicular offset from the reference arc.
Next step
Press OK to proceed to measurement mode.
The signs for the distance and angle differences are correction values (required minus actual).
The arrows indicate the direction to move to get to the set out point.
NextPt To add the next point to be set out.
Field Description
d HA Horizontal direction from the measured point to the set out point. Positive
if the telescope must be turned clockwise to the set out point.
d.H.D Horizontal distance from the measured point to the set out point. Positive
if the set out point is further away than the measured point.
d.d.Z Height difference from the measured point to the set out point. Positive if
the set out point is higher than the measured point.
•
Either, press ALL to measure and record.
•
Or, press
BACK to return to the REFERENCE ARC screen.
•
Or, continue selecting ESC to exit the application.
REFERENCE ARC - SET OUT
Next step
Applications 89