Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom25 Series Manual Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

CP Center point of arc

SP Start point of arc

EP End point of arc

P Set out point(s)

R Radius of arc

AL Arc length

To set out a series of equidistant chords along the arc.

CP Center point of arc

SP Start point of arc

EP End point of arc

P Set out point(s)

R Radius of arc

CL Chord length

To set out a series of points along the arc defined by the angle segments from the center point

of the arc.

CP Center point of arc

SP Start point of arc

EP End point of arc

MP Measured point

R Radius of arc

b Central angle

1. Press SETOUT from the REFERENCE ARC screen.

2. Select one of the four methods of set out available.

Enter the set out values. Press PrevPt/NextPt to toggle through the calculated set out points.

Field Description

Distrib. For set out arc: Method of misclosure distribution. If the entered arc length is not

an integer of the whole arc, there will be a misclosure.

Set out chord

Set out angle

Access

Set out point, arc, chord

or angle

88 Applications