Product Manual

11.10.3 Subapplication Measure Line & Offset
The Measure Line & Offset subapplication calculates from measurements or coordinates, longitu-
dinal and orthogonal offsets and height differences of the target point relative to the reference
arc.
Press MEAS from the REFERENCE ARC screen.
Field Description
dLine Calculated distance longitudinal to the reference arc.
dOffset Calculated distance perpendicular from the reference arc.
d.d.Z Calculated height difference relative to the start point of refer-
ence arc.
•
Either, press ALL to measure and record.
•
Or, press BACK to return to the REFERENCE ARC screen.
11.10.4 Subapplication Setout
The setout subapplication calculates the difference between a measured point and the calculated
point. The reference arc application supports four ways to set out:
•
Set out point
•
Set out chord
•
Set out arc
•
Set out angle
To set out a point by entering a line and an offset value.
CP
SP
R
L+
Off -
EP
P
CP Center point of arc
SP Start point of arc
EP End point of arc
P Set out point
R Radius of arc
L Line offset
Off Perpendicular offset
To set out a series of equidistant points along the arc.
Description
Access
Measure
Next step
Description
Set out point
Set out arc
Applications 87