Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom25 Series Manual Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

Field Description

Segm Segment number. Includes the misclosure segment, if applicable.

CumL Cumulation of the segment lengths. Changes with the current

number of segments. Includes the misclosure segment length if

applicable.

dH.A. Horizontal direction from the measured point to the setout point.

Positive if the telescope must be turned clockwise to the setout

point.

d.H.D. Horizontal distance from the measured point to the setout point.

Positive if the setout point is further away than the measured

point.

d.d.z. Height difference from the measured point to the setout point.

Positive if the setout point is higher than the measured point.

dL Longitudinal distance from the measured point to the setout

point. Positive if setout point is further away than the measured

point.

dO Perpendicular distance from the measured point to the setout

point. Positive if setout point is to the right of the measured

point.

The following are important messages or warnings that may appear.

Messages Description

Baseline too short! Base line is shorter than 1 cm. Choose base points

such that the horizontal separation of both points is

at least 1 cm.

Coordinates invalid! No coordinates or invalid coordinates for a point.

Ensure that points used have at least Easting and

Northing coordinates.

Recording to interface! Data Output is set to Interface in the GENERAL

SETTINGS menu. To be able to successfully start

reference line, Data Output must be set to Int.

Memory.

•

Either, press ALL to measure and record.

•

Or, press ESC to return to the Define Line Segment screen and from there, press BACK

to return to REFERENCE LINE screen.

•

Or, continue selecting ESC to exit the application.

11.10 Reference Element - Reference Arc

11.10.1 Overview

The Reference Element - Arc application allows the user to define a reference arc and then com-

plete the following tasks with respect to the arc:

•

Line & offset

•

Set out (Point, Arc, Chord, Angle)

1. Select Apps from the MAIN MENU.

2. Select R_ARC from the Apps menu.

3. Complete application pre-settings. Refer to "5 Applications - Getting Started".

Define the reference arc.

Messages

Next step

Description

Access

Next step

Applications 85