Product Manual

NextPt
To add the next point to be set out.
Field Description
d HA Horizontal direction from the measured point to the set out
point. Positive if the telescope must be turned clockwise to the
set out point.
d.H.D Horizontal distance from the measured point to the set out point.
Positive if the set out point is further away than the measured
point.
d.d.Z Height difference from the measured point to the set out point.
Positive if the set out point is higher than the measured point.
dOffset Perpendicular distance from the measured point to the set out
point. Positive if the set out point is to the right of the measured
point.
dLine Longitudinal distance from the measured point to the set out
point. Positive if the set out point is further away than the meas-
ured point.
The following are important messages or warnings that may appear.
Messages Description
Base line too short ! Base line is shorter than 1 cm. Choose base points
such that the horizontal separation of both points is
at least 1 cm.
Coordinates invalid ! No coordinates or invalid coordinates for a point.
Ensure that points used have at least Easting and
Northing coordinates.
•
Either, press ALL to measure and record.
•
Or, press BACK to return to the REFERENCE LINE screen.
•
Or, continue selecting ESC to exit the application.
11.9.6 Grid Setout
The Grid subprogram calculates and displays the stake out elements for the points on the grid,
orthogonal (dL, dO, dH) and polar (dH.A., d.H.D., d.d.z.). The grid is defined without bounda-
ries. It can be extended over the first and second base points of the reference line.
Messages
Next step
Description
Applications 81