Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom25 Series Manual Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

11.5 Missing Line Measurement

Missing Line Measurement is an application used to compute slope distance, horizontal distance,

height difference and azimuth of two target points which are either measured, selected from the

memory, or entered using the keypad.

The user can choose between two different methods:

•

Polygonal: P1-P2, P2-P3, P3-P4.

•

Radial: P1-P2, P1-P3, P1-P4.

SD 1-2

SD 2-3

T101 1st target point

T202 2nd target point

T303 3rd target point

SD 1-2 Slope distance from T101-T202

SD 2-3 Slope distance from T202-T303

Az 1-2 Azimuth from T101-T202

Az 2-3 Azimuth from T202-T303

SD 1-2

SD 1-3

SD 1-4

1-4 Target points

SD 1-2 Slope distance from 1-2

SD 1-3 Slope distance from 1-3

SD 1-4 Slope distance from 1-4

Az 1-2 Azimuth from 1-2

Az 1-3 Azimuth from 1-3

Az 1-4 Azimuth from 1-4

CP Center point

1. Select Apps from the MAIN MENU.

2. Select MLM from the Apps menu.

3. Complete application pre-settings. Refer to "5 Applications - Getting Started".

4. Select Polygonal or Radial.

After completing the measurements required, the MLM RESULT screen will appear.

NewPt 1

To calculate an additional line. Application starts again

at point 1.

NewPt 2

To set point 2 as the starting point of a new line. A

new point 2 must be measured.

RADIAL

To switch to radial method.

Description

Missing Line Measurement

methods

Polygonal method

Radial method

Access

Missing line measure-

ments

MISSING LINE RESULT -

Polygonal method

Applications 69