Product Manual

Z
1. Select Apps from the MAIN MENU.
2. Select RESEC from the Apps menu.
3. Complete application pre-settings. Refer to "10.2 Starting an Application".
4. Select Accuracy Limit:
1. Status: On to activate a warning message if the calculated standard deviation
exceeds the limit.
2. Set the accuracy limits for the Easting, Northing and Height coordinates and the
standard deviation angle.
3. Press OK to save the limits and return to the Pre-settings screen.
5. Select GO! to begin the application.
Enter the name of the station and the height of the instrument in the Station data screen and
press OK.
Next step
To access the Sight target point screen:
•
Either, press OK after entering the target data fields in the Target data screen.
In the Sight target point screen:
Next step
Press ALL or MEAS/REC to measure the next known point.
11.4.2 Measuring Information
The following measurement sequences are possible:
•
Horizontal direction and vertical-angles only (resection)
•
Distance and horizontal direction and vertical-angle
•
Horizontal direction and vertical-angles to some point(s) and horizontal direction and verti-
cal angles plus distance to other point(s).
Single face I, single face II, or dual face I and II measurements are always possible. No specific
point sequence or specific face sequences are required.
Access
Enter target data
Sight target point
Measurement sequences
66 Applications