Product Manual

•
Either, press ALL to record another point.
•
Or, press ESC to exit the application.
11.3 Set Out
Set Out is an application used to place marks in the field at predetermined points. These prede-
termined points are the points to be staked. The points to be staked may already exist in a job
on the instrument, or be manually entered.
The application can continuously display differences, between current position and desired set
out position.
Points can be staked using different modes: Polar mode, Orthogonal to station mode and Carte-
sian mode.
Polar Set Out mode
+d H
A
+d HD
1 Current position
2 Point to be set out
dHD Longitudinal offset: positive if point to be
setout is further away.
dHA Angle offset: positive if point to be setout is
to the right of the actual direction.
Orthogonal to Station Set Out mode
d HA
+d T
+d L
1 Current position
2 Point to be set out
dL Longitudinal offset: positive if nominal point
is further away.
dT Transversal offset, perpendicular to line-of-
sight: positive if nominal point is to the
right of the measured point.
dHA Angle offset: positive if nominal point is to
the right of the actual direction.
Cartesian Set Out mode
+d E
+d N
1 Current position
2 Point to be set out
d E Easting offset between point to be set out
and actual point.
d N Northing offset between point to be set out
and actual point.
Next step
Description
Set Out modes
64 Applications