Product Manual

11 Applications
11.1 Common Fields
The following table describes common fields that are found within the firmware applications.
These fields are described here once and not repeated in the application chapters unless the field
has a specific meaning within that application.
Field Description
Pt, Pt 1 Point ID of the point.
TgtHGT Height of the reflector.
HA Horizontal direction to the point.
VA Vertical angle to the point.
hDIST Horizontal distance to the point.
sDIST Slope distance to the point.
dHGT Vertical distance to the point.
E Easting coordinate of the point.
N Northing coordinate of the point.
Z Height coordinate of the point.
11.2 Survey
Survey is an application used for the measurement of an unlimited number of points. It is com-
parable to Survey from the MAIN MENU, but includes pre-settings for the job, station and ori-
entation prior to beginning a survey.
1. Select Apps from the MAIN MENU.
2. Select SURVEY from the Apps menu.
3. Complete application pre-settings. Refer to "5 Applications - Getting Started".
I Pt
To switch between individual and current point num-
bers.
CODING
To find/enter codes. Refer to "8.1 Coding".
Field Description
Comment / Code Comment or Code name depending on the coding method. Two
coding methods are available:
1. Comment coding: This text is stored with the corresponding
measurement. The code is not related to a codelist, it is
just a simple comment. A codelist on the instrument is not
necessary.
2.
Expanded coding with codelist: Press CODING. The
code that was entered is searched for within the code list
and it is possible to add attributes to the code.
Description of fields
Description
Access
SURVEY
Applications 63