Product Manual

Field Description
Stn Station name of a previously saved station position.
If no station was set and an application was started, or if in Survey and a measurement was
recorded, then the last station is set as the current station.
The Inst.H. field appears once the station coordinates have been entered. Enter the instrument
height if desired and press OK to return to the Pre-Settings screen.
10.5 Selecting the Orientation
10.5.1 Overview
All measurements and coordinate computations are referenced to the orientation of the set sta-
tion. The orientation can be entered manually or determined from points that are either meas-
ured or selected from the memory.
Select Select Orientn. in the Pre-settings screen and choose:
•
Angle To enter a new bearing. Refer to "10.5.2 Manual Orientation".
•
Coordinates To calculate and set the orientation using existing coordinates. A maximum of
five target points can be used. Refer to "10.5.3 Orientation with Coordinates".
10.5.2 Manual Orientation
Select Angle in the STN.ORIENTATION screen.
HA=0 To set Brg: 0
Field Description
Brg Horizontal direction of the station.
TgtHGT. Height of the reflector.
BS ID Point ID of the backsight point.
•
Either, press ALL to measure and record the distance and horizontal angles. This will calcu-
late and set the orientation and return to the Pre-Settings screen.
•
Or, press REC to record the horizontal direction only. This will set the orientation and return
to the Pre-Settings screen.
Station input
☞
Next step
Description
Access
Access
MANUAL ANGLE SETTING
Next step
60 Applications - Getting Started