Product Manual

Using rapid coding, a predefined code can be called directly via the keypad on the instrument.
The code is selected by entering a two-digit number, the measurement is then triggered and the
measured data and code saved.
A total of 99 rapid codes can be assigned.
The rapid code number can be assigned when the code is created in the Coding screen, in the
Codelist Manager in GGO, or it is assigned in accordance with the order in which the codes were
entered, for example, 01 -> first code in the code list ... 10 -> tenth code in the code list.
1. Select Apps from the MAIN MENU.
2. Select SURVEY from the Apps Menu.
3. Press R-Code.
1.
Press R-Code.
2. Enter a two-digit number on the keypad.
☞
A two-digit code must always be entered on the keypad even if only a
one-digit code was assigned.
For example: 4 -> enter 04.
3. The code is selected, the measurement triggered and the measured data and code
saved. The name of the selected code is displayed after the measurement.
4.
Press R-Code again to end rapid coding.
The following are important messages or warnings that may appear.
Messages Description
Cannot edit attribute! Attribute with fixed status cannot be changed.
No codelist available! No codelist in memory. Manual input for code
and attributes are called automatically.
Code not found! No code is assigned to the entered number.
Codelists can be easily created and uploaded to the instrument using the supplied GGO software.
Description
Access
Rapid coding step-by-step
Messages
GGO
54 Coding