Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom25 Series Manual Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

Default

To reset offset values to 0.

Column

To go to Column Offset.

Field Description

Trav. Offset Perpendicular offset. Positive if the offset point is to the right of

the measured point.

Length Off Longitudinal offset. Positive if the offset point is further away

than the measured point.

Z-Offset Height offset. Positive if the offset point is higher than the meas-

ured point.

Mode Period for which the offset is to apply.

0 after REC The offset values are reset to 0 after the

point is saved.

Continuous The offset values are applied to all further

measurements.

☞

The offset values are always reset to 0 when the application is

quit.

Next step

•

Press OK to calculate the corrected values and return to the application from which the off-

set function was started. The corrected angle and distances are displayed as soon as a valid

distance measurement has been triggered or exists.

7.3 Column Offset

Determines the coordinates of the centre point of cylindrical objects and their radius. The hori-

zontal angle to points on both the left and right sides of the object are measured, and the dis-

tance to the object as well.

Hz2

Hz1

TSOX_023

Offset

Description

48 Functions