Product Manual
Table Of Contents
- 1 Safety Directions
- 2 Description of the System
- 3 User Interface
- 4 Operation
- 5 Settings
- 6 Tools
- 7 Functions
- 8 Coding
- 9 MapView Interactive Display Feature
- 10 Applications - Getting Started
- 11 Applications
- 12 Data Management
- 13 Calibration
- 14 Care and Transport
- 15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
- 16 Software Licence Agreement
- 17 Glossary
- Appendix A Menu Tree
- Appendix B Directory Structure
- Appendix C Connector PIN Layout
6 Tools
6.1 Calibration
The CALIBRATION menu contains tools to be used for the electronic calibration of the instru-
ment. Using these tools helps to maintain the measuring accuracy of the instrument.
1. Select Tools from the MAIN MENU.
2. Select Calib. from the TOOLS menu.
3. Select a calibration option from the CALIBRATION screen.
In the CALIBRATION screen there are several calibration options.
Menu selection Description
HA-Collimation Refer to " Line-of-sight error".
Vertical Index Refer to " Vertical index error".
Comp.Index Refer to " Compensator index error".
View Adjustment Data Displays the current calibration values that have been set
for HA-Collimation and V-index.
6.2 Auto Start Routine
Through the Auto Start tool, it is possible to record a user defined sequence of key presses so
that, after switching on the instrument, a particular screen can be displayed after the Level &
Plummet screen instead of the MAIN MENU. For example, the general SETTINGS screen for
configuring the instrument settings.
1. Select Tools from the MAIN MENU.
2. Select Auto St. from the TOOLS MENU.
1. Press REC in the AUTO START screen.
2. Press OK to confirm the information message and begin the recording process.
3. The next key presses are stored, up to a maximum of 16. To end the recording press ESC.
4. If the auto start Status: is set to On, the stored key presses will be executed automatically
after switching on the instrument.
The automatic start routine has the same effect as pressing the keys manually. Certain instru-
ment settings can not be made in this way. Relative entries such as automatically setting EDM
Mode: IR-Quick upon switching on the instrument, are not possible.
6.3 System Information
The SYSTEM INFO screen displays instrument, system and firmware information, as well as set-
tings for the date and time.
☞
Please provide the instrument-related information, such as instrument type, serial
number and equipment number, as well as the firmware version and build number
when contacting support.
1. Select Tools from the MAIN MENU.
2. Select SysInfo from the TOOLS menu.
Description
Access
Calibration options
Description
Access
Auto start step-by-step
☞
Description
Access
Tools 43