Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom25 Series Manual Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

Field Description

Off Bluetooth sensor is deactivated.

The following fields are active only when Port: RS232 is set.

Field Description

Baud rate Speed of data transfer from receiver to device in bits per second.

1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200

Data bits Number of bits in a block of digital data.

7 Data transfer is realised with 7 databits.

8 Data transfer is realised with 8 databits.

Parity Even Even parity. Available if data bit is set to 7.

Odd Odd parity. Available if data bit is set to 7.

None No parity. Available if data bit is set to 8.

Endmark CR/LF The terminator is a carriage return followed

by a line feed.

CR The terminator is a carriage return.

Stop bits 1 Number of bits at the end of a block of digital

data.

Acknowledge On Acknowledgement expected from other

device after data transfer received. An error

message will display if no acknowledgement

is returned.

Off No acknowledgement expected after data

transfer.

5.4 Unit Settings

1. Select Settings from the MAIN MENU.

2. Select Unit from the Settings menu.

Field Description

Angle Unit Sets the units shown for all angular fields.

° ' " Degree sexagesimal.

Possible angle values: 0° to 359°59'59''

dec. deg Degree decimal.

Possible angle values: 0° to 359.999°

gon Gon. Possible angle values: 0 gon to 399.999 gon

mil Mil. Possible angle values: 0 to 6399.99mil.

☞

The setting of the angle units can be changed at any time. The actual dis-

played values are converted according to the selected unit.

Min. Reading Sets the number of decimal places shown for all angular fields. This is for

data display and does not apply to data export or storage.

For Angle Unit ° ' '': (0° 00' 01" /0° 00' 05"/0° 00' 10").

Dec.deg: (0.0001 / 0.0005 / 0.001).

Gon: (0.0001 / 0.0005 / 0.001).

Mil: (0.01 / 0.05 / 0.1).

Dist. Unit Sets the units shown for all distance and coordinate related fields.

meter Meters [m].

ft (US) US feet [ft].

Access

Unit Settings

Applications - Getting Started 41