Product Manual

ManualsBrandsGeomax ManualsSurveying EquipmentZoom25 Series Manual Reflectorless Total Station

Table Of Contents

1 Safety Directions
- 1.1 General
- 1.2 Definition of Use
- 1.3 Limits of Use
- 1.4 Responsibilities
- 1.5 Hazards of Use
- 1.6 Laser Classification
- 1.7 Electromagnetic Compatibility EMC
- 1.8 FCC Statement, Applicable in U.S.
- 1.9 ICES-003 Statement, Applicable in Canada
2 Description of the System
- 2.1 System Components
- 2.2 Container Contents
- 2.3 Instrument Components
3 User Interface
- 3.1 Keyboard
- 3.2 Screen
- 3.3 Status Icons
- 3.4 Softkeys
- 3.5 Operating Principles
- 3.6 Pointsearch
4 Operation
- 4.1 Instrument Setup
- 4.2 Working with the Battery
- 4.3 Data Storage
- 4.4 Main Menu
- 4.5 Survey Application
- 4.6 Distance Measurements - Guidelines for Correct Results
5 Settings
- 5.1 General Settings
- 5.2 EDM Settings
- 5.3 Communication Settings
- 5.4 Unit Settings
6 Tools
- 6.1 Calibration
- 6.2 Auto Start Routine
- 6.3 System Information
- 6.4 Loading Software
- 6.5 Licence Keys
- 6.6 Instrument Protection with PIN
7 Functions
- 7.1 Overview
- 7.2 Offset
- 7.3 Column Offset
- 7.4 2 Dist. Offset
- 7.5 Brg/Dist
- 7.6 EDM Continuous
8 Coding
- 8.1 Coding
- 8.2 Rapid Coding
9 MapView Interactive Display Feature
- 9.1 Overview
- 9.2 Accessing MapView
- 9.3 MapView Components
10 Applications - Getting Started
- 10.1 Overview
- 10.2 Starting an Application
- 10.3 Selecting the Job
- 10.4 Selecting the Station
- 10.5 Selecting the Orientation
11 Applications
- 11.1 Common Fields
- 11.2 Survey
- 11.3 Set Out
- 11.4 Resection
- 11.5 Missing Line Measurement
- 11.6 COGO
- 11.7 Area & Volume
- 11.8 Remote Elevation
- 11.9 Reference Element - Reference Line
- 11.10 Reference Element - Reference Arc
- 11.11 Construction
- 11.12 Road 2D
- 11.13 Road 3D
- 11.14 Traverse
12 Data Management
- 12.1 Data Management
- 12.2 Exporting Data
- 12.3 Importing Data
- 12.4 Working with a USB Memory Stick
- 12.5 Working with Bluetooth
13 Calibration
- 13.1 Overview
- 13.2 Preparation
- 13.3 Calibrating Line-of-Sight and Vertical Index Error
- 13.4 Calibrating the Compensator
- 13.5 Calibrating the Circular Level of the Instrument and Tribrach
- 13.6 Inspecting the Laser Plummet of the Instrument
- 13.7 Servicing the Tripod
14 Care and Transport
- 14.1 Transport
- 14.2 Storage
- 14.3 Cleaning and Drying
15 Technical Data
- 15.1 Angle Measurement
- 15.2 Distance Measurement with Reflectors
- 15.3 Distancer, Measurements without Reflectors (Reflectorless mode)
- 15.4 Distance Measurement Reflector (Long Range)
- 15.5 Conformity to National Regulations
  - 15.5.1 Dangerous Goods Regulations
- 15.6 General Technical Data of the Product
- 15.7 Scale Correction
- 15.8 Reduction Formulas
16 Software Licence Agreement
17 Glossary
Appendix A Menu Tree
Appendix B Directory Structure
Appendix C Connector PIN Layout

Field Description

90°

0° 180°

1. No beep.

2. Fast beep; from 95.0 to 99.5 gon and 105.0 to

100.5 gon.

3. Permanent beep; from 99.5 to 99.995 gon and

from 100.5 to 100.005 gon.

Off Sector Beep is deactivated.

Setout Beep On The instrument beeps when the distance from the cur-

rent position to the point to be staked is 0.5 m. The

closer the prism is to the point to be staked the faster

the beeps will be.

Off Beep is deactivated.

Screen ill. 20% to 100% Sets the screen illumination in 20% steps.

Crossh ill. Off to 100% Sets the illumination level of the crosshairs in 20%

steps.

Heating On The display heater is activated.

Off The display heater is deactivated.

☞

The display heater is automatically activated when the display illumination

is on and the instrument temperature is 5°C. This function is only availa-

ble for Zoom25.

Data Output Sets the location for data storage.

Int. Memory All data is recorded in the internal memory.

Interface Data is recorded via the serial interface or the USB

device port, depending on the port selected in the

COMMUNICATION SETTINGS screen. This Data

Output setting is only required if an external storage

device is connected and measurements are started at

the instrument with MEAS/REC or ALL. This setting is

not required if the instrument is totally controlled by a

data logger.

GSI-Format Sets the GSI output format.

GSI 8 81..00+12345678

GSI 16 81..00+1234567890123456

Mask Sets the GSI output mask.

Mask1 Pt, HA, VA, sDIST, ppm+mm, TgtHGT, Instr.h.

Mask2 Pt, HA, VA, sDIST, E, N, Z, TgtHGT.

Mask3 StationID, E, N, Z, Instr.h. (Station).

StationID, Ori, E, N, Z, Instr.h. (Station Result).

Pt, E, N, Z (Control).

Pt, HA, VA (Set Azimuth).

Pt, HA, VA, SD, ppm+mm, TgtHGT, E, N, Z (Measure-

ment).

Code Saving Sets if the codeblock is saved before or after the measurement. Refer to

"8.1 Coding".

Language Sets the chosen language. The current loaded language(s) are shown.

A selected language can be deleted by pressing DelLng. This function is

available if more than one language is installed, and the selected language

is not the chosen operating language.

Applications - Getting Started 37