Product Manual

2
6
7
5
4
5
5
1
3
1
1
Zoom_004
1. Extend the tripod legs to allow for a comfortable working posture. Position the tripod
over the marked ground point, centring it as best as possible.
2. Fasten the tribrach and instrument onto the tripod.
3. Turn on the instrument, and, if tilt correction is set to 1- or 2-axis, the laser plum-
met will be activated automatically, and the Level Up screen appears. Otherwise,
press FNC from within any application and select Level.
4. Move the tripod legs (1) and use the tribrach footscrews (6) to center the plummet
(4) over the ground point.
5. Adjust the tripod legs (5) to level the circular level (7).
6. By using the electronic level, turn the tribrach footscrews (6) to precisely level the
instrument. Refer to "Level up with the electronic level step-by-step".
7. Center the instrument precisely over the ground point by shifting the tribrach on the
tripod plate (2).
8. Repeat steps 6. and 7. until the required accuracy is achieved.
The electronic level can be used to precisely level up the instrument using the footscrews of the
tribrach.
1. Turn the instrument until it is parallel to two footscrews.
2. Center the circular level approximately by turning the footscrews of the tribrach.
3. Turn on the instrument, and, if tilt correction is set to 1- or 2-axis, the laser plummet will
be activated automatically, and the Level Up screen appears. Otherwise, press FNC from
within any application and select Level.
☞
The bubble of the electronic level appears if the instrument tilt is inside a certain lev-
elling range.
1. Center the electronic level of the first axis by turn-
ing the two footscrews. When the electronic level
is centered, the indicator on one of the electronic
bubbles is centered.
Setup step-by-step
Level up with the elec-
tronic level step-by-step
30 Operation