Product Manual

Icon Description
B&W C&T
RS232 communication port is selected. For C&T: Tapping the icon opens
the COMMUNICATION SETTINGS screen.
A double arrow indicates a field has a selectable list.
3.4 Softkeys
Softkeys are selected using the relevant F1 to F4 function key. This chapter describes the func-
tionality of the common softkeys used by the system. The more specialised softkeys are descri-
bed where they appear in the program chapters.
Key Description
ALPHA To change the keypad operation to alphanumerical.
NUM To change the keypad operation to numerical.
ALL To start distance and angle measurements and save the meas-
ured values.
BACK To return to the last active screen.
COORD To open the manual coordinate entry screen.
EDM To view and change EDM settings. Refer to "5.2 EDM Settings".
EXIT To exit the screen or application.
MEAS To start distance and angle measurements without saving the
measured values.
OK If entry screen: Confirms measured or entered values and con-
tinues the process.
If message screen: Confirms message and continues with selec-
ted action or returns to the previous screen to reselect an option.
IR/RL To toggle between IR and RL EDM modes.
DISPL. To display the list of available points.
REC To save the displayed values.
DEFLT To reset all editable fields to their default values.
SEARCH To search for an entered point.
VIEW To display the coordinate and job details of the selected point.
To display the next softkey level.
3.5 Operating Principles
Use the On/Off key.
The alphanumerical keypad is used to enter characters directly into editable fields.
Description
Common softkey functions
Turn instrument on/off
Alphanumeric keypad
26 User Interface